Fanatic Shark

This is a board I have been looking at for a very, very long time.

BAD NEWS - The Shark was discontinued in 2015 !!!
                         Perhaps this will drop the price of used Sharks !!!

as usual ... that link has changed and I used the WayBack Machine to get this:

RE: FANATIC SHARK 2015
Posted by: craig (IP Logged)
Date: August 11, 2014 01:55PM
Hi Joe,

Indeed the Shark line has been replaced by the more modern Gecko shape, over a 2yr period of testing and development, we have taken all the best characteristics of the Shark and blended them into the latest Gecko 120-156+ sizes, to have the best of both worlds. So you´ll notice the new Gecko 120 is just slightly longer and narrower, than the 2013/4 Gecko, this is a trend on the other sizes like 133/146/156+ too, so Shark customers will feel at home on the Gecko´s, but also enjoy the benefits of the modern shapes.

We have had prototypes in many of our WS centres and the feedback, also on the 2013/4 Gecko´s has been overwhelmingly in favour of the Gecko concept, so it was with a lot of thought and consideration that we reduced our Freeride line to two shapes, with the Hawk and Gecko, making it easier for shops, centres and customers to choose the ideal boards?

Good sailing,
Craig/Fanatic

More bad news - Jeff in  Australia went from a Fanatic StingRay (which he busted) to a Shark 150 and felt Shark did NOT plane up as early/well as the Ray :-( On the other hand, Roni and Rami are loving their Shark 150 LTDs. I will make a point of doing a FULL review on the 150 LTDs next summer - with videos !!! Jeff changed his mind about the board and LOVES it now = his favourite, fastest and best in chop. As for myself in 2017 - purchased an older model (2006) Shark 145 HRS. Will report and film about it !!

I was looking at the Fanatic Viper and Shark when the Viper first came out in 2005. The Viper was of interest because I was coming off an old longboard. The Shark interested me since then because it was a great potential starting shortboard ie no centreboard. Some of my fellow windsurfers seem to consider shortboards as those used in high winds only. That is fine, however, we do live in a light wind area.


I asked our local Fanatic salesman for his wisdom on the Shark. People are always calling it a "beginner" board. Well...in his words, font size and colour ....

Most who talk shit, haven’t tried one.


All who love and rave about them, own one.


So tell me, who’s talking shit?


Wisdom enough for ya?


Bruno

When I finally did purchase my first shortboard {brand new} in 2007, the Shark was a little more money. Perhaps I still should have chosen the Shark at that time due to its HRS cover {high resistance skin}. The AHD FastForward that I purchased did NOT have an extra protective coating and as such easily dented or scratched. This does not affect performance - only looks and resale value.

Here is a Fanatic Video where the Shark and Hawk are discussed and described:
That video has been removed from youtube - will try to find one similiar, butt for now here is one about the shark 2013...
Better one found - Nik Baker speaking about the different Fanatic boards and how they compare...


As you saw, there are LTD versions of the 135 and 150 litre Shark models... These are more sensitive to dings and catapaults and require expertise. For myself, an HRS covering is useful and my skills may not even be up to determining performance differences between the HRS and LTD models. The Hawk is considered to be a free-ride more performance oriented Fanatic board. Once again, are your skills up to knowing the difference ? The Shark is the get up and go board = KISS.
Keep It Simple and Standard.  or as I always say - let it RIP {and NO that is NOT rest in pieces :-) }

What I like about the Shark is it can get you started and then take you really far. There seemed to be some concern when Fanatic changed the volume and dimensions, butt Tinho Dornellas, a master instructor of Calema Florida fame, has put those ideas to rest !!
http://www.calema.com/forums/viewtopic.php?id=633
as usual - websites change :-( and thus, this is what I got from the WayBack Machine:

Up until 2009 Fanatic had one of the strongest line ups of performance/user friendly boards on the market, which bore the Shark model name. All boards in that family where very good, especially the 145 and 130.
So you might imagine that I was pretty apprehensive about the newer models that replaced my tools of the trade. So recently I got a Shark 135 which replaced the 130.  That is like replacing a Ford GT40 with something new, how could that be good news? Well lo and behold, the new 135 is BETTER. Wow I said that! Well that board simply blew me away at how nice it performs on the water, and jibing on this board is an absolute joy.  It planes without fuss, and the board instantly has a lively ride, but totally controllable. Being wider than the 130, I expected it to be more “porky� , but NO, on the contrary, it far surpassed the 130's abilities which honestly is a total surprise to me. The Shape of the deck on this board is also much better than some larger boards I have tested before. The static stability is just right, so you have a lot of confidence in tacking or just schlogging around.. Job well done Fanatic, now please keep this board for at least 10 years. It will be an Icon.
The Shark has many volumes - from 105 to 165 !! I thought it only went as far as 150. The widths are from 65 to 83 cm. At 83 cm the 165 liter board is cited as being able to handle a 10-oh sail and comes with a 52 cm fin. The more common sizes are the 120 and 135 litre models ... Even the 135 litre board with 73 cm width comes with a 48 cm fin and can handle sails up to 9-oh.
http://www.fanatic.com/content/products/windsurfboards/shark/index_eng.html#.UZAZS6I8DTo

So, these are easy riding boards that can handle quite large sails. This means they are ideal for light wind areas like where I live. Sails that large on flat water with an early planing board like this just blast. How much more performance does one need ??

Two things people worry about are tighter jibes and handling chop. These are critical performance areas as well. Let me see if we can find some magazine reviews for more detailed information ...

The German Windsurf Magazine suggests that the 135 board is able to come out of turns at break neck speeds and even handles laydown jibes very well for its width.
http://www.surf-magazin.de/test-center/freerideboards/fanatic-shark-135-ltd/
They do suggest a smaller fin for the smaller sails and this makes total sense since the supplied 48 cm fin is more aimed an 8-oh sails and this board can go all the way down to 6-oh where fins are typically under 40 cm !! In terms of performance the magazine is saying the board should satisfy the requirements for an amateur racer as well.

When Tinho evaluated the Shark 130 LTD originally he stated," It swallows the chop. Actually, it flies over it. There is an occasional tip tap on incoming chop just to remind you of how fast you are going, but nothing like any of the bothersome clanker and raucous clatter of the competition.

The jibe is great. Tight arcs, wide arcs, no problem. The standard fin is outstanding, light, proper twist, and perfectly matched to the board's function." This is why he was so concerned when Fanatic announced changes on this board. As seen earlier he raves about the new 135 even more !!


Found an article in the windsurfingmag of May 2006 where they reviewed the Fanatic Shark 145 LTD. They felt the Shark of this size was aimed at middle to heavyweights, planed early, had a steady jibe and went well at slow speeds ie schlogging. Several Experts gave the board a perfect ten rating !!! {It is unfortunate that this magazine is no longer with us - it is already missed dearly !!!}


http://epikoo.com/windsurfing/boards/fanatic-shark-2010  states The "Shark is a board especially dedicated to freeride lovers. And it is dedicated to both advanced or beginner riders, so that they will both enjoy high quality windsurfing sessions. The Shark is built on the successful pattern of the famous Eagle, but is more forgiving and tackles the waves in a gentle way so it can be used by beginner sailor without any effort or hassle. The shape is compact in features and has balanced rocker lines with a narrower tail which assure enough power for high speeds and extra maneuverability too. "

Let's see if we cannot find some videos :-)







I find it interesting that most of these videos are not of the marketing type. They are regular people going out and having simple fun. These boards are made to go out and have fun and yet still go fast !! The only negative comment I found was on the Auzzie forums where someone claimed it was too tame. From what I have seen and read, it may seem tame, butt it ain't lame :-)

The French Magazine Wind Magazine has a piece on the Shark 150 in FEB 2012. Hope there are no issues posting it here - I give them FULL credit !!! called "Liveliness in its Sweetness". I prefer to call it "lots of life in its soft ride". Soft ride is NOT a bad thing. It reminds me of when I rode in some sportier cars and found them to be too stiff and almost painful to ride. When going over chop, I prefer a softer ride over teeth chattering excitement. I will put some translation after ...


Translation:
SHAPE
Dating from 2010, the Shark 150 has a compact shape, shorter and wider than average. The board is well made with a fin that requires no tools to mount it. The HRS construction places the Fanatic among the lightest of the group! This board is also available in LTD based on carbon Kevlar.
{Personal Note: I would have thought the HRS made the board heavier. Also, what is interesting is, the HRS boards have NO vent plug !! }


On the Water
Strap inserts straps placed back slightly on the outside of the deck on this Fanatic bring a very appreciable, driving comfort due to ergonomic feet position that perfectly matches the roundness of the rail. Globally stable, good travel speeds are still very accessible. The planing is attained smoothly while remaining very competitive.

Once planing, this board is quick and fun to navigate. It navigates on the fin , very much alive on the water above. Consequently, the Fanatic goes over chop without tapping on it ; it goes over it. One does not feel anything underfoot as the Shark is alive and free, we provide effortless control as we remain in moderate wind conditions for the sail being  used.

When Aeolus panics {Greek god of the winds freaks out} ,there is a tendency to lift in the gusts which may make the ride more technical. These flights mean the pilot needs to know how to control his board in changing conditions.



The jibe excels in  sweetness, is easy to engage and is scalable if one seeks to attack or to tighten the radius of the curve. Its thin rails on the back really helps to cut its curve to turn in place ie tight curves

VERDICT
Highly valued for its feel on the water, its ease of riding and ergonomic comfort, the Shark provides good sensations ie FUNThis is a design evolves continually to give pleasure even to a higher level of rider ie not just for beginners. If the conditions are alive, we may see a smaller range of sail use in strong winds, forcing down a sail size quickly, which can also be an advantage.


It takes some basic skills and to be resourceful to be able to appreciate the true colours of the Shark! Once again, this board is NOT just for beginners and even suggest some skills to appreciate it.
Here is the Wind Magazine summary chart...



here is a piece from WindSport Magazine 2013 gear guide- now realize i may not have listed specs






http://windsurfingrocks.blogspot.ca/2014/08/about-fanatic-shark.html
is where Greogor posted this :-)


Unfortunately in 2015 there will be NO MORE SHARKS :-(


and here we are in SEPT 2014 and this board is for sale @ 2-rad $%^&*
god, i want it , but my boss Roni is looking at it too
will give him 2 days head start :-)
after that my AHD goes for sale !!



Roni bought the board in 2014, but does NOT use it much. Other windsurf buddy, Rami, also purchased a SHARK 150 LTD:



Unfortunately when he tried to sell it in 2016, I had already invested in the AHD SL2 132. Had I known ... Also had a chance to purchase a Shark 130 LTD for a decent price @ 2-rad. Bruno told me to grap it on-line - MANY people enquired about it. Helmut suggested against it since I already had so many boards. I looked at the 2016 sessions and decided against it due to lack of outings in the 7.0-8.5 range with planing. Would have to sell the AHD, etc , etc.
MUCH better off hoping to do a windsurf trip next year.
For my current skills (or lack thereof) this would have been the board for me
Now I will continue to struggle with the AHD SL2
which is okay too ...

In 2016 EVERYONE keeps telling me that I need an "easier", more user friendly board to get in the straps. Would have loved to do that with a SHARK 150 LTD, but ... So, In early 2017 I put a deposit on a 2006 Shark 145 HRS... Ron has purchased a Gecko 120 to replace it and absolutely LOVES the Gecko. Jeff has complained that it (his Shark 150) does NOT plane up as early as he had hoped. Zokay, I will put an 8.x sail on it and foot straps up front like in the pic... (After some time, it became Jeff's favourite board - fastest and best in chop !!!) Here is my "new board" :


Ron says it is a 2007, but images from the web seem to indicate 2006 max. Internet says the board is 263x75 cm and takes sails from 6-9. On the board it seemed to indicate 5.5-8 m². The 2005 does not seem to have the same graphics nor dimensions (260x69  and 5.5 - 8.5).  The 2007 does NOT have the same graphics as the pic above and as per internet is 263x75 and 6.0 - 9.0 m² sails. So, I will assume the board was the same between 2006 and 2007 with simply a change in graphics ... Went through my archives and found a Fanatic brochure from 2005/2006 and that is the board and the sail range is clearly marked as 6.0 - 9.0 m² and came with a 50 cm freeride fin. Found a used 52 cm fin on windsurfing.qc from bigmike - will see if I can get it for a good price - this brings the price of the board up when trying to sell it 😒 (supposed to have an OFO of 51 cm - reason for 50 cm fin coming with the board - aimed for MAX back in the day)

Some things to note, the board has NO vent screw and quite rounded rails... It is long by today's standards, but that is okay with me !! Based on previous analyses ... I used to say the ideal sail for a board was its width divided by ten, which suggests 7.5 m² for this board and would NOT surprise me in the least. Since the board originally came with a 50 cm fin, I would be inclined to believe the board was slated to handle 9 meter sails. This board came with NO fin. When I sell it, I will need to find a fin to let go with it - easier to sell that way ...

In 2009 the German windsurf magazine did a report on the Shark 145 ...
http://www.surf-magazin.de/boards/freeride/fanatic-shark-145-hrs/a2658.html
They marked it as 152 liters and 9.4 kg with same dimensions as the 2006/2007. In their tests they called it the sportiest and yet the longest board of the test. "The board glides very well, is fast and runs freely over the fin..." They say it is less comfortable in chop, which surprises me with the 75 cm narrow width ...

Once I get the board here, on the water,  etc, I will do a separate post ..
For now will continue here ...
This is what Tinho Dornellas of calema sports said about the Shark 145 in 2005
https://www.calema.com/forums/viewtopic.php?id=42

Fanatic Shark 145

This board surprised me the most for how easily it planed. I put a 9.8 sail in light winds when no one was out sailing , everyone waiting for winds to build. With the conditions I had, I was expecting a fair amount of schlogging to the windline, but the minute I was on the off the shore, the board surged, wanting to plane. A smooth pump and the board was off on a plane. Frankly I did not expect this from a board that is fairly short, and having compared to boards of similar size in the Exocet, Starboard  and Tabou line.
Once on the plane, the ride is quick and the board is very maneuverable. The Jibe is OK , predictable and very accommodating to different techniques and rider input, always reliable.
The mast track is quite far back, so be careful to place it well forward of halfway.

The footstraps are placed perfectly for different rider stance and weight, as well as skill level and type of sailing to be done on this board. One thing I really like on these new fanatics is the multiple footstrap positions you are offered. Most European boards feature a footstrap width that is so extremely wide (for booties) that sailing barefoot feels like your feet are dancing around constantly. Not with these boards. You can close or widen the attachment position so your foot is either super snug or comfortably loose.

The overall looks of the board are very appealing with a polished and very harmonious outline. I don't usually pay attention to this (other than wincing at some butt ugly noses on some boards out there..) But the fact that the board behaves so well in rough conditions has me looking closer at what the nice outline is doing.
This is the same I found on the Eagle boards.

The Fin supplied is of very good quality and performance, and very light for its size.

I highly recommend this board for those looking for a board in this category, especially if you deal with choppy or wavy conditions. This board deals with rough conditions with total ease.

Heavier weight guys in the 100 kg category should love this board for its high wind abilities. It has the volume for underpowered sailing and it does not become too big when it blows.
This is also the board for light weights and women that seek that first high performance board to advance their skills such as using footstraps carve jibing, and planing.

Sails 9.8 ? 6.0

For 9.8-8.5 sails:
T= 145 cm
Footstraps
FO4, RO2

Intermediate sailing
T = 145 cm
Footstraps
FI 3
RI 2
Stronger winds, sails 8.0 -7.0
T= 142-140 cm
3/6/06 Lately I have tested the LTD with a Meanline B 46 cm and the board became an excellent jibing board. Nice surprise!!!

 
i even found a website that says the 2007 Shark 145 was good for 5-10 m² sails :
http://frsvp.free.fr/windsurfing2007.pdf

that is a bit much
with a 50 cm fin coming with the board, 10 m² is for sure the max sail size
would guess it is like my AHD FF 160/79 - best for 6-8 meter sails
Ron used 6.5 @ 135 cm mark in 16-20 winds, but is much lighter
Tinho warned to put bigger sails at 145 cm mark


Here is the sticker from a later year: 6.5 - 9.5 !!


As you can see, my interest in the Fanatic Shark is more/bigger than ever. I am trying to determine the history of the board - when it came about until its retirement from the fleet in 2015....


Somewhere around 1993 there was a Fanatic Ultra Shark 291. I used to have a Fanatic Ultra CAT from around that time and so, imagine that was standard name for the boards of that time. This board, the Ultra Shark seemed to be VERY well liked. It was 125 liters and 291x59 cm with a trim box that took 30-44 cm fins. With those fins and board size/shape, it makes sense that it was slated for sails 5.0 to 7.5 meters...

It seems somewhere around 1995 there was a newer version of only 118 liters (286x55 cm) and was known as the Fanatic Mega Shark 286. It was considered "high strung" compared to the 291.

Somewhere around 2003/2004/2005 there were the square nosed Sharks 129 and 142.  The 129 and 142 were also available in LTD versions... What happened between 1995 and 2003 ?? In 1996 they/Fanatic seemed to have the Snake, BEE, Fly, CAT, Falcon, Hawk and Class-X (NO Shark ??) Also found references to an Ultra Gecko around 1995 ?? So, they brought the name back around 2015??


In 2005/6/7 there were the Sharks 135, 145 and 160 with LTD versions of the 135 and 145. These boards already had the rounded noses...


In 2008 the sizes were changed to 130/145/160 still with the two smaller sizes available in LTD.


In 2010 they must have realized the Shark was a popular freeride board and put some Eagle influence on their shapes and came out with 100/115/125/135/150/165 sizes. It was still the 135 and 150 that were available in LTD.


From 2011 until 2014 Fanatic dropped the number of Sharks down to 105/115/125/135/150/165.


I am very curious to know which was the best seller, most liked, etc ...
On youtube one still sees videos posted of the Shark 291 which was pre-2000 !!
NOT bad for a freeride board
Will the Gecko do as well ??

Have to put a decent Shark 145 video here... Found one - Hatteras with that board and an Ezzy 9.5 !!



These videos disappearing or going "PRIVATE" is REALLY frustrating $%^&*(
 
Here is a video in 2022 of myself on my Fanatic Shark 145 in gusty SW 15-45 kph winds with my Gaastra GTX free-race 8.5 m² sail: 


 
In early 2017 I tried to put a hold on a fin @ 2-rad and deal it down from $150. It ended up getting sold  before I could sell my True Ames SB 58 cm weed fin. Was hoping to get $150 for that fin and then purchased the one @ 2-rad. Bruno did NOT warn me and it was sold ... 
Lesson learned. Instead purchased a Curtis 47 cm slalom fin and had it sent to my brother-out-law in NY. This cost me closer to $100 CDN. Can't wait to try it ... The fin AND the board ... but we just got more snow on 01APR2017...


Here we are in 2022 now and I have not posted any videos of myself on this board. I guess ideally it will be with a 7-oh in decent medium winds like 30-50kph :-) In June of 2022 I purchased some more GoPro mounts and am now just waiting for some wind - after recovering from covid-19 !!

Early "Planing"


There are currently many discussions on the windsurf forums regarding early planing {and NOT planning :-) }. When one speaks of early planing, we are not referring to which board planes earliest in 16 knots of wind, but rather which boards plane up earliest in winds under 10 knots !! These are obviously LIGHT winds and for someone like myself of 100 kilos/220 lbs, it seems unattainable.

As they said in the July/August 2007 Windsurfing Magazine:



What seems to be happening in the market is, there are these specialized boards like the Starboard Serenity and the Exocet RS D2 making their appearance. They seem to have some similarities to what we have seen in the past and yet ...
Serenity

Exocet RS D2









As you can see here, these shapes are "longer" and pointed in the front to "cut" the waves. The Serenity has NO footstraps and both have centre boards. They are not really similiar animals except in the objective to get on water in light winds and get good speed. The Serenity has been around a while and the RS D2 is having its first year with only 500 being produced. Thus it is more difficult to compare the RS D2 with current standings. I am sure this will NOT take long to happen :-)

We have already seen and discussed Formula wide boards and long narrow racier longboards. These have been around for quite some time and have been discussed in another post... formula-boards-and-longboards.html  It is known that the wide Formula boards with 100 cm and their long fins have early planing potential due to those two(2) factors - width + fin.

Remi of Starboard has done some tests on planing performance in light winds. He is middle weight to my recollection and not a feather weight of 65 kilos.

In speed only :

In 5 knots : Serenity > Phantom Race > Apollo
In 7 knots : Apollo > Serenity > Phantom Race
In 10 Knots : Apollo > Phantom Race > Serenity 


The Apollo project is basically Formula and as such we see that the Long Raceboard is never number one in speed. I would challenge to say that it may be the most versatile and most comfortable in lower and higher winds...These tests were performed with an 11 square meter sail in 2007. The results are still valid since things have not changed that much for these boards.

Addendum injected here: Does this mean everyone should run out and get a formula board of 100 cm width in order to plane early ? Definitely NOT !! People live in different environments and are different weights. In  the Windsurfing Magazine of June 2004 {now defunct :-( } they say light weights from 100 to 160 pounds should go from 70 to 85 cm wide, middle weights of 160 to 185 pounds 75  to 90 cm and heavyweights of more than 185 pounds - go to 80 to 100 cm wide.
And later here it states someone of my weight should go with a 75 cm fin. I have an 80 cm board and go as high as a 10-oh race sail with a 53 cm pointer fin. I think I will stop there. A new formula board will cost over $2000, fin over $200, mast over $800 and sail over $1000. We are talking about 4 to 5 thousand dollars.
SORRY - No CANDU !!

Here is the Serenity in 5 to 7 knots with an 11-oh race sail:


In the same post on the SB forum, Jean-Marc informs us about Pfaffi:

http://www.pfaffi.at/pfaffi_fins/F1_files/Media/Formula%20finlenght%20we/Formula%20finlenght%20we.jpg?disposition=download

Clique to see clearly in new window

1) for a light weight rider of 65 kg, a fin length of 53 cm should suffice
2) Pfaffi used a Formula HWR board, a 70 cm fin and a Severne Reflex 12 m2 sail to be able to start and sustain the planing as of 7 knots. He weights 92 kg. 
3) If his theory holds true and according to his table, you should be able to do the same with a 75 cm fin for your 100 kg body weight. 
So, what does this mean for an average Joe like myself who happens to be a heavyweight (as per windsurf standards and statistics on average male body weights) living in a light wind area ? Used Serenity or Formula can be purchased for under $1000. My largest sail is a 10-oh. Will NOT spend another $1000 to gain 2 knots. The boards discussed here are all well around the $2000 mark new. Locally a fellow has purchased an Exocet Warp 100 Formula board brand new and hated it - he is now trying to sell it at a very reasonable price of $1500 since it IS new, but not getting any nibbles. Pfaffi suggests a Formula with a 75 cm fin,

My answer is an old Fanatic Ultra CAT which was used to race and considered great fun in the early 90's. The MegaCAT was shown to be faster, but more technical or difficult to use. My biggest issue with light winds is that they are typically NOT stable and as such i need the long hull and stable race sails with cambers.

These boards are all niche boards and NOT common. I found my niche and I hope you find yours :-)

Other boards I have not mentioned here are the JP SLW {JP SuperLightWind}, the SB US {UltraSonic} and Tinho Dornellas of Calema Sports custom boards. These are also early planers and less upwind/downwind oriented than the Formula boards.

So far, it looks like the RSD2 may be a keeper !!! {Another Canadian windsurfer , also named Joe, has both the JPSL and the Serenity and is looking at the RSD2 :-) } Believe that in the end he decided upon a StarBoard Phantom 377 - with the batwings - and loving it !!

Here are some links to the RS D2 discussions:
http://www.calema.com/forums/viewtopic.php?id=632
http://www.lbwindsurfing.com/

Tinho blasting on RS D2
In order to get speed or planing in light winds under 10 knots there seem to be two(2)concepts that have been combined in the RSD2. The front of the board is narrow and pointy in order to slice through water with the least resistance. The Serenity has this concept to the extreme and as such seems to be the fastest in really light winds around 5 knots. The other concept is width and volume to generate more flotation and thus less resistance to water. This is applied at the back of the RSD2 and taken to the extreme with the Apollo project or Formula boards. These boards have shown to be the fastest in winds over 7 knots. Now it would be interesting to see a test of Formula and RSD2 together in winds around 10 knots :-)

In order for any of this planing to occur in winds under 10 knots, people are using really large sails over 11 meters squared. I have a 10-oh which I find uncomfortable when I have to carry the load ie wind drops. The 11-oh I tried once was even worse. So, I do not know how people that are not heavy-weights manage these large sails !! Technique wins over brawn I am sure :-)

This discussion would not be complete if one did not mention the hybrids. These are boards that do not specialize in any one thing or form of sailboarding and yet are flexible enough for many facets. These boards would include the Exocet Kona and Tabou Windstyler/SUP. The Kona has already started to be a one-design race class - good for light winds up to 20 knots.

Update: Local windsurfer known as "sailboarder", who goes to BDU on his KONA made a suggestion to read the reviews of the new Starboard with BatWings :-) In the review one sees the author is a Formula fan, butt does find the longboard just a little more "fun" and "comfortable". {thanx sailboarder !!}
http://www.seabreeze.com.au/forums/Windsurfing/Review/Starboard-Phantom-377BW/

2nd update: another aspect of early planing that has not been discussed here is technique. If two people are out on the same day and on the same equipment and yet one planes earlier than the other, it can be technique. Guy Cribb covers this here:http://www.guycribb.com/userfiles/documents/EarlyPlaning.pdf
3rd update: since writing this discussion, I have found another option - it is called FreeFormula. It is a wider board over 85 cm and less than 95 cm - as per my definition. Mine is a BIC Techno Formula of 94 cm and 170 liters, butt there are others. For my 100 kilos, this board planes with my TR-4 10-oh in around 10 to 12 knots of wind. My AHD 160 with 80 cm width will start to plane around 12 knots. The BTF schloggs better and planes up a little earlier. It is NOT a race Formula, but instead more of a funboard and planes very smoothly. This has become my most used combo in the light winds. Rather than the Fanatic Ultra CAT with the 10-oh or 8-oh. Planing slowly is an odd concept and needs to be experienced. It means any mere puff and you take off :-)
---------------------------------------------------------------------------------------------
Just saw an interesting quote in a Windsurfing Magazine - June 2010 pg 50
"Trade-Offs: Top-end  speed and heavy-air control suffer the most when extremely early planing is achieved." Then they went on to say this does not apply to the Fanatic Skate 100 :-) That's funny cuz that board goes out in heavy winds with sails 4 to 6 meters. It better be fast !!

Wider boards will have a smaller wetted area and as such plane earlier than a narrow board of the same volume. To plane earlier one needs the wide board, big fin and big sail. Sailor weight makes a difference too. A lighter sailor can plane with equipment that may not plane at all for a heavyweight. The same equipment can require almost 2 knots less wind if one loses 20 pounds. For someone like myself of 225 pounds this is not entirely unreasonable.I try to start every season at around 210 and by December I am always back to 225. I never quite make it down to 200 :(

So, a person should be able to plane in 10 mph/knots or about 20 kph average winds. NOT everyone lives in windier conditions. Here is a wind blob from Dorval aeroport in Montreal taken from iwindsurf and Dorval tends to be windier than the rest of the area - for some reason ...As one can see, winds are typically from the W & NE and typically under 15 mph.

 Actually it was windalert and there was an important piece of data missing on the left, which showed the numbers per month for the whole year - and yes, winds were from W and NE and under 15mph ALL year long ...


One interesting comment i have been reading lately and pondering ....
To plane earlier - in general - need to keep board trim ie flat and often Guy Cribb and others suggest moving mast track forward and boom up !!!
This feels counter-intuitive to me - get the front out of the water - move mast back, non? NON

Tinho says:
Early planing depends on a board being perfectly trim on the water- front to back and rail to rail. Track too far back kills that
So you have to find the balance between both. Or you can add something into the mix: boom height.
Track forward and higher boom allows early planing and good top end speed. You can also play with things like fin rake, twist and flex, fin profile, sail profile, and draft stability.
The above observations are made for the Formula board-- it is important to recognize that the width of the board itself is another major detail into this early planing/ speed /control equation.

That is the beauty of windsurfing- so many variables you can spend a lifetime perfecting your speed.

Final addendum (i hope :-)
I just re-read this post and interestingly enough, did NOT discuss pumping. I spend more time discussing equipment rather than technique. Most people will suggest that getting on a plane quickly requires technique in terms of setup, stance AND pumping - rather than passively waiting to plane. They call it full body pumping. This gets the board out of the water and over the little wave at the front quickly. Here is a fellow, who I have seen in a better video , showing how he uses pumping to the fullest. Will look for the other video too ...



This is not the same fellow, Fred Mistral, and is called "PUMP IT"



Here was Peter Hart about "early planing" now his videos have been made "private :-(

 


and another    https://www.youtube.com/watch?v=bik1h-i4dnY

In March 2014 on Ozzie windsurf forum flatout said..  

I would say that wide does not equal early planing. I used to have an 80cm slalom board, which I used with an 8m sail. I then bought a 112L 68cm freestyle board and a 6.9m power sail. The planing threshold between the two was equal, if not lower for the freestyle kit. I chose to go the light and small route. But I can still sail in the same winds, although now I am focusing more in manoeuvres instead of speed. 

also....
some people say - all i do is quote from old magazines
another said - stop reading and do some sailing :-)

so, here goes...

in the April 2004 issue of the Windsurfing Magazine {now defunct}
"flat water tends to favour additional width"
"heavyweight sailors may opt for slightly wider sizing"
"gusty winds favour added board width"
"adding width offers stability for rookies, as well as planing and
pointing power for light air specialists"

from the chart in that issue
100 cm wide - max 12.5 sail
90 cm wide - max 11.0 sail
80 cm wide - max 10.0 sail
70 cm wide - max 7.8 sail
60 cm wide - max 6.5 sail

----
However, some also say "dont go too wide. narrow is key to "the glide"
especially in VERY light winds

Here is some more from Peter Hart on getting planing:

http://www.windsurf.co.uk/peter-hart-up-and-riding-in-a-flash/

Fast Forward to Fall 2015.
Here Dr. Elch of Germany discusses how he manages to plane in 8 to 12 knots of wind - much to the envy of all the other windsurfers on the water:
http://www.mauisails.com/forum/viewtopic.php?id=5235
What he is using ?? He started with an RRD Lightwind 150 (236 cm x 91) and a 9.6 sail. But he wanted even earlier planing. He found a "2007 np v8 10.6 in average condition. My sailmaker cut the clew and win 10 cm" gained/lost on the outhaul. "Needing some small gust (11-12) knots to accelerate, the board runs and runs even down to 8 knots." CONGRATULATIONS !!

For me I still prefer to start with 12 knot winds when trying to plane with my JP SLW92 (165 liters and 250 cm long) with a MauiSails TR-4 10.0 m² sail. However, I have started to try the combo in 8 to 12 knots in order to practice and hope for planing ...

In early 2016 I asked a couple of questions on the iwindsurf forum that kind of flew back in my face. Asked about using larger sails than my MauiSails TR-4 10 m² sail. In the question I posted a video of myself on the JP SLW. Since I was NOT in the straps and NOT fully planing , this drew criticism. How can I consider anything larger when not even fully planing in the straps. Also asked about overcoming a phobia of getting in the straps. Again that drew criticism. I mentioned technique earlier, but besides being obvious in the videos, did not discuss the importance of the straps. Here I will suggest the importance of straps and plan to show how much they help by my getting in them in 2016, This will need to be my priority in 2016 - NOT just a wish and as such need determination and a plan !!

here's a quote from http://forums.boards.mpora.com/showthread.php/38989-Sail-Size-10-Knots
"you need more than 10 knots or 12-15mph to get planing on Formula gear. 10knots is longboard weather, and probably still not planing. 
But most people don't windsurf until it's blowing at least 15knots or say 18mph. At which point, with your weight and on your huge board, you'd need an 8m sail. At 70kgs and with lightweight 100litre kit, 18mph gets me planing easily on a bagged out 5.8 metre sail. 
My thresh-hold of planing interest starts at about 15knots or 18mph. 
Below this and I can still have fun but I would not choose an expensive big sail, super-wide board and then expect to plane – but instead I'd rather choose a small sail and make do with the journey on offer."

But if you are a lightweight , you are able to plane much earlier than a heavyweight like myself. Yet the world's fastest windsurfers are tall heavyweights ...
Here is another video of a lightweight planing in light winds ...



2016: So, some of the most effective boards in REALLY light winds are longboard types with pointy noses. Like the SB Serenity, which is no longer manufactured, and the Exocet RSD2. Now it seems there is a new player on the block - out of the Netherlands - the SurfersGroup SG-R 380. Some are saying it beats out the RSD2 completely...

https://www.facebook.com/surfersgroup.surfersgroup

http://windsurfwarenhuis.nl/catalog/sgr-380-2016-p-275.html

http://www.seabreeze.com.au/forums/Windsurfing/General/Surfersgroup-boards-SG-R-380-any-info/



The SurfersGroup 380 is a complete different board than the D2. The 2012 worlds was a bit of a disaster for the Exocet boss who was on site. They promoted the board in Europe using Stephan van de Berg in marketing. But during the event all the riders (without 1, a Dutchman body weight 150 kilo) who raced the D2 gave up after 2 days. Even some passed champions we know who would ride that board didn’t show up I myself actually was in love seeing the first presentation of the D2 during the worlds in 2011. But after I have seen the first trailer of Stephan van den Berg in low wind conditions  I was disappointed as I’m heavy weight 105 kilo and Stephan is still <70 kilo (it glides slower than a Laser) and started to build the proto of the SurfersGroup 380.   

Some major differences: Weight : +/- 5% without dagger and foot straps.  SurfersGroup 380 is 12.5 kilo The D2 is 24 kilo,  We measured 3 different D2 boards at Masters Worlds in 2012.  Width: SurfersGroup 380, 65cm D2, 77cm  Volume: SurfersGroup 380, 290L D2, 428L  Shape: SurfersGroup 380 has an box rails flat tail D2 has an round rails bevel tail  nose: SurfersGroup 380 has a positive nose, it follows the wave. The D2 has a negative nose that points in to the wave. The shape differences make the SurfersGroup glide earlier and box rails will lift the tail as the D2 still is sticky. The buoyancy of the D2 should be a benefit of that board but the shape and the weight are against.   

The SurfersGroup out classes the D2 and the 377L the new Exocet RS 380 in the up wind course The position of the tail foot straps of The SurfersGroup 380 is closer to the rails than Exocet RS 380 and 377L wings and gives a better downwind control it makes the SurfersGroup easier to ride than ten 377L and New RS In 15 to 20 knot wind I hunt and kill slalom boards. ;-)   

There are also major differences in the construction. The SurfersGroup boards are hollow and build like a kayak/ race car using prepreg fibers and vacuum infusion technique. We have a multi fibber layup on the deck /bottom and inside. The core is designed in using different materials and strength. As we do not have an 0,20 x290l= 5,8 kilo EPS core. That weight benefit makes it that we are able to double/triple fibre/layup materials compared to other raceboard manufacturers.  The Production boards like Starboard 377l and Exocet never are the weight of Officials ISAF registration. Simple mathematics show that. The EPS core weight of the D2 428 litre board is 10 kilo the PVC core 2 kilo. Build in, the Fin box, mastrack foot strap inserts, vent, dagger board casket and strips, some kind of coating and non-skid weight close to 5 kilo. Is a total of 17 kilo so if the board registration is 14.5 kilo then there is nothing left for the fibber and epoxy.????   

The weight and construction of Mistral One Design or the older Mistral competition epoxy and the Mistral board you ride now, build some time ago are tougher and lighter than the new raceboards of Starboard and Exocet build now.

Update: Believe this post was written around 2012. At that time some wider boards like JP Super Light Wind and SB UltraSonic were just coming out. Even I can plane with one in about 12 knots of wind, but with larger sails - 10 m². About two(2) years later, in 2014, the freemove boards started coming out. These too are wider, but also thinner boards. Again, they were toted as the earliest planing of boards AND easy jibers. Now in 2017, the manufacturers and the rich are suggesting foiling in the lightest of winds - 8 knots and up ... The reason I say the rich is - a foil costs about $2000, it is suggested one get a foil board, which is more like $3000 and now it is suggested one get specialized foiling sails too - another $1000 ?? That's about a $6000 investment. Sorry, NO CANDU.
It is January 2019 and 2-rad is selling Horue Tiny + vini foil package for $6000 before taxes. Add a sail designed for foiling with tax and all and we are looking at about $8000 !! WOW. All my current stuff together is probably not worth that much. Foiling may bring the rich to foiling, but not your average joe windsurfer...

Back on Ice n Snow 2012 :-)

Have to bring this post back to the fore-front AGAIN. This is where my head, body and spirit are right now :-) Latest entry is 12MAR12 at the bottom of this post. Finally added some videos of myself at the end. Slush and light winds did NOT help, butt ...
----------------------
In December I brought the mast bases up to the "country", which is the term we use for the chalet up north. Obviously also brought the masts, boom and sails. Typically use 6-oh and 8-oh and bring the 7-oh just in case. The boards are there from the last winter windsurf season.

Temps were a bit high (just below freezing) and there was about 2 to 3 inches of snow on the frozen lake. We were worried that there would be NO snow for Xmas and no ice on the lake. We lucked out on both counts. Because there was snow and it was sticky due to the temperature, neither board seemed to do well. And on top of it all, there seemed to be NO wind :-(

After I finished putting the mastbases on the two(2) winter windsurf "sleds", I went and checked out the wind again. It was supposed to be 15 kph and reach 25 later. Well, it felt like it was closer to 10 kph from the west. Oh well, let's rig the MS-2 8-oh which is a powerful sail and has 2 cams to hold shape. Tried the snow sled on the snow and went no-where - due to sticky snow and lack of wind. Tried it on the track of ice someone cleared and it went. Not too fast, but much better than the snow...

Okay then , let's try the ice sled - what, with an 8-oh cambered sail ??
If the ice was colder, less snow on the lake and the wind stronger, there is NO way I would put the 8-oh on the ice sled. In this case it went and was speedy a couple of times.

The whole affair was just enough to tease me - and perhaps make me the laughing stock of the lake. Oh yeah, i already am that - so, who cares? :-)

In other words good start to the season !!!
Now, let's hope for some better winds and cooler temperatures...
In the forecast -- winds are up when temps are still close to freezing and colder when there are no winds ...

Here are some pics from earlier posts - forgot to take pics on this first outing ...

Tried again on Wednesday the 28th on the lake - cooler temps, a bit more wind - not steady , butt lots more snow $%^&*( Excellent work-out, but not too much success. Does NOT mean it is time to give up - just wait for better conditions OR make my own track on the lake :-)

Again on Monday 2nd of January. Put the Gaastra 7-oh. Winds were a little better, but not steady enough. Once again temps were too close to freezing. Was absolutely sweating. In deep snow at these temperatures, snow gathers at the front of the snow sled. Perhaps that is why Langis Caron's sled is made of slats !! In other words the ice sled did not work on the ice and the snow sled went, butt not good enough on either $%^&*() Let's hope temps are better back home and ice forms on the rivers.

In the comments "Peconic Puffin" suggests some action photos and/or videos of the ice sled. Will see what i can do :-)

People take ice windsurfing really seriously - especially in Europe -  check these kits in the making !!


I will write more on the subject when I have a few good runs under my belt from the 2012 season ...

Early January brought my "stuff" down from the chalets. As usual forgot something - my boom was under the bed - am not about to use my carbon boom on the ice %^&*( Since people are on the ice and kiting near West Island, i went and got the boom and some other stuff on the 24th - yesterday. Tonight I went to the local river to see what all that rain and freezing had done. There was water around the bridge, butt the sides were solid. Took the ice sled and used it like a skateboard :-) Near the middle of the river, my boots went through the snow into about 3 inches of water. There are usually layers of ice and water on rivers and lakes - so, no worries !!! There was still a smile on my face and it would have been bright enough for a good sail !!!

FINALLY - today on the 29th of January I took a run on the local river. Tested the ice in the morning and it was "acceptable" - did not go in the water nor break top ice. Winds were around 20 to 40 kph from the SW. I had difficulty setting up the Simmer 3 camber 6-oh sail since it has been so long since i have. The helmet and goggles are a blessing. Should have brought the harness. It has been too long and as such my forearms got tired. Went for about an hour and ran into a watery section. Okay, enough for one day then ... All in all it was a very good session - even if short - gave it an 8 out of 10. Need someone to take pics now. Would also love to do this WITH the kiters at AAO / Vaudreuils/ Hudson on Lac de deux Montagnes ...

05FEB2012 - Originally planned to go on Saturday. Ironically ALL the family plans from Saturday went to Sunday. Winds were to be 40 - 60 kph from WSW late in the afternoon !! Brought the 6-oh, 7-oh AND the 8-oh just in case ... Test on the river in the morning showed there was snow with a crust of ice and the snow sled would be the best option.  Winds were light when I arrived and actually stayed light and i was glad i brought and rigged the 8-oh free-race MS-2 sail. There was a winter carnival at Ste-Rose on the other side of the river and bridge . so, there were plenty of observers :-) Since winds stayed light and was on the snow, i decided to try the harness .. I had to leave the coat open - need a waist harness that fits over the coat ! I fell once while hooked in - that would NOT be pleasant on ice ... It felt MUCH better when hooked in , butt had to move the lines back more than 10 cm. Managed to do a straight down-winder by accident, so, maybe jibing is not such an impossibility after all. Gave the session a resounding 9 out of 10 - lost points cuz winds got lighter and dropped - rest was the best ... {Still trying to get someone to come and take action shots and/or video ^&*(). Can't get my movie maker son to do it.. Teenage boys are sooo lazy :-) }

The next day I looked at purchasing a used $50 large/L Dakine waist harness, butt it did NOT fit. Managed to make the seat harness fit over the thin coat after some wrangling :-) Will try this next time !!

11FEB2012 - another 9 outta 10 session on the local river ! Winds were light - around 10 knots from the NE {checked the weather maps - was actually more like 8 knots !!}. It was difficult to find a place. The Rosemere side had wind blocked by the island and bridge, the Ste-Rose site had all kinds of stuff about due to the winter carnival AND there seemed to be wind blockage as well... Was about to give up when I remembered Parc Charbaneau. NOT a good place for summer windsurfing due to the yucky waters, butt in winter I should be able to rig right beside the water. Was about to go when a fellow came and asked about the sled - home made patent ? :-) Discovered that areas with altering materials and really big ice bumps were not so easy and did fall once when going from an icy section to a snowy section. Went for about an hour and was off the ice before 9h00. Was cold today and winds were already dropping. Forgot to put two(2) pairs of socks and my right hand was a little cold as well. Did not use the harness since i was not planning to go for long AND not sure of the surface. Still managed a 9 outta 10 !!
Oh yeah - was obviously on the snow sled with my freerace sail, the MS-2 8-oh ..
After some deliberation, I decided to move the harness lines back to 65 cm for the 8-oh and i moved the mast base up about 5 cm , which ironically seems to coincide with the ice board mast base positioning...

12FEB2012 - tried to go out SUN afternoon, butt was not nearly as good a session $%^&* Went to the river on the Rosemere side and rigged the 8-oh since winds were up n down. The sail was the right choice, butt the adjustment of the mast foot was NOT a good one AND the seat harness would not go over my coat $%^&* With the mast foot where it was, I had to use sail steering in order for the tail not to swing around. Will definitely move the mast foot back up - perhaps i should keep the wrench in the tool bag ?? Have some pliers for emergencies, but no wrenches. Gave this session a mere 6 outta 10 %T^U*IOP In desperation I tried the ice sled on the crusty snow, but it just does not go - and for the record, I had moved the foot UP and now I moved it BACK... Am now actually considering adding fins to the skis on my snow version. Perhaps I will be able to remove the centre ski and save some weight...

Found a really interesting business article on "The Case of Winter Windsurfing"
http://pure.au.dk/portal-asb-student/files/39891933/master_thesis_Elina_Cate.pdf
There is mention of Freeskates, Hiberna boards, Velliluge and Snowfers. Some obvious names are Jeff Brown of the USofA (maine or Vermont I believe) , Marcel Bradette of Quebec City, Quebec, Canada and Charles Chepregi  of Toronto, Ontario, Canada.

"Experts say that winter windsurfers innovate mainly to fulfill their own and their 
fellow sportsmen needs. Most of them are enthusiasts of the sport and as there is not 
much of commercial product manufactured currently and also in the past, they take on 
the innovation process and try to solve problems associated with the equipment and 
make improvements themselves. The needs mainly concern reaching higher speeds and 
the control and manoeuvring of the board. They also do it for fun cause they enjoy the 
process. Also gaining reputation is important for those that take part in competitions and 
try to reach new speed records. "


These are the fins I made with what was laying about - if the next snow session doesn't work, the board is going flat with these babies at the back :-)



This is a video of a sled with skis, but with a "cooler" platform. Same principles...


This one just sold on e-bay for about $230 - "old" Freeskate. I have only used the ice version of my two(2) boards once or twice. Thus this board would need to be a little LE$$ money. However, if there is a market for this, perhaps i should start converting skateboards and selling them on e-bay ?? Obviously I am NOT as equipped as the fellow from the Netherlands in the video further up in this post !!!




SAT 18FEB2012 - It has been fairly warm lately - like as high as 5 degrees Celsius !! When I went to load the van, I found the plastic cap that goes into the top of the ferrule in the snow behind the van - what luck . I've been wanting to get a waist harness and auventfou had an epic XL used for $25. Went to see it, butt there was NO way it was going to fit. Tried a newer one, butt it was almost $200 !!! Was about to forget about it, but mentioned the Dakine seat that is almost a waist harness - the XT. Yes, René had one used in the back - tried it and bought it for $40 WITH the bar !!! New ones are about $140 with the bar !!! (Saw the horrible remains of a car accident that me realize how important it is to appreciate, life, wife, family, health et al.) When I got to the local river, there was some water on the ice at the side, butt in general pretty icy with some rough snow patches and lite winds about 10 mph out of the WSW. This meant time for the ice board and no more than the 7-oh. Gave the session a 9.5 outta 10 !! What was missing in order for it have been perfect ? There was some rough crisp patches from snow mobiles and i kept going all the way into the wind shadows. With this harness, it is also time to shorten the lines. Believe this is the harness that Helmut purchased last summer !!! The wife says this board needs to be patented. Domenic always says the same thing !! The ice version could sell in parts of the States and the snow version further north. There still needs to be a version that works in deep snow. Was supposed to call my son to come n take pics, butt he went to bed so late :-( that i decided to forget about it for this time - would LOVE to get someone with a digital movie camera and youtube it. Also, still cannot wait to go to the kiting area :-) During this session I discovered why Marcel has a metal grill near the back of the board. The anti-skid tape is fine to start. When there is water or warmth, ice begins to build up and eventually it is just a sheet of ice near the back of the board - this needs to be re-enforced with steel grill or ???

SUN 19FEB2012 - lighter winds today and sunny. Do I dare ? YES, i did - ran the ice board with the free-race MS-2 8-oh sail in 8 to 10 mph winds !! Again a 9.5 outta 10 - again due to rough ice in the centre and this time fore-arm fatigue. I need to start doing weight exercises on the forearms. It was funtastic - once again Jerry the teenager is too tired !!! Will hafta find someone else to take the photos. Mr. Ed from work did not take the bait when i asked him :-(

People have considered me crazy for some of the things I do and the risks I take. I have met "YVENTE" and he is insane. He informed me that he sails Lake Champlain all year round. Here is an example of his "insanity".
Does his board say GOYA or 666 :-)


Here is another one where Yvan takes a break on a floating block of ice !!


He also does windski on a sled similiar to mine, but as a MUCH better windsurfer, he is able to tack and jibe on ice !!!


SUN 26FEB2012 - weather was warm all week , water spots in the river and wife's birthday. Check ice in the morning and okay with about 4 inches snow on crust. GOOD to GO with the snow version. Man was I bummed in the first 10 minutes. Kept going upwind. OK, time to play. Was able to get the MS-2 8-oh and snow virgin going with either leaning the sail forward {like turning} OR putting back foot on the mast foot and front foot out front. Both were kinda uncomfortable, butt both pointed out that the mast foot needed to be moved forward. Gave it a 7 outta 10 - only cuz i still managed to have fun. Good thing Dom could not come to film or take pictures. Ironically I had been measuring the windsurf boards and discovered the balance point was back of the mast track by about 6 inches. Well, the mast foot on the snow virgin is about 6 inches up from the balance point. Thus moved the mast foot up about 12 cm before I start trying to put fins on. The board needs to feel balanced first. The current placement is close to where the mast foot originally was !!!
Actually just double checked - the original placement was 10 cm back from where i just moved it from. Therefore, if this does not work, next one is 22 cm back !!!

THURS 01MAR0212 - snow storm and about 5 to 10 cm fresh powder. Left work early to miss some traffic. Winds were more than usual and brought the 7-oh and 8-oh, butt ended up rigging the 7-oh. Started out great and went back to get the harness I forgot. Fell when i hit a snow bank and wind was cut once in a while. Still an 8 outta 10. Steering was a little better, but makes me wonder why i changed the original design - will need to go over my notes. In any case, I am ready to try it on bigger "waters" now ie bare it to the public. It will only get better now :-) May remove the centre ski to make it lighter and quicker - as i said, it is going to approach the original design !!!
I also see why Marcel of Quebec split his board up -- had some snow pile up on the board today...

SUN 04MAR2012 - is the season drawing to an end ?? The road signs warn the trucks that the defrost season starts tomorrow on the 5th of March !! Yesterday was crazy weather with winds hitting over 80 kph gusts. It was warm, melting and later snow squalls. Today it was cooler -5 Celsius and less wind {under 20 kph from WNW } Went to Vaudreuils because I wanted to see what it was all about. There were two(2) kite schools and I was lucky to get a parking spot. Chatted with a fellow who was a windsurfer and he informed me winds were better further out. Rigged the MS-2 8-oh and tried the snow sled. I am NOT used to going for such long runs. Did a sudden spinout and fell banging my head - good thing for the helmet. The snow sled is okay, butt not perfect yet... Since it was crusty, tried the ice sled, This was MUCH better. Gave the session a resounding 9 outta 10 just cuz the weather was so great and it was fun chatting !! When I got back, i checked the mast base on the snow version and it was loose. Removed the ski and fixed the mast base to the board. Good thing I had to do that cuz the mast base itself needed tightening. OK, all set for next session ?? Non, i am going to put the fins in the back to stop the spin outs ... Took some pictures of the scene and did not realize until afterwards that the camera was set to B&W/black n white :-) kinda looks spaceage - on the moon. the 2nd one was aito-adjusted using photoshop - something i rarely do !!

SAT 10MAR2012 - checked the local river and it is finished !!
Too many soft spots and can hear sounds :-( of ice and water working ...
Also winds are light today and this weekend not much wind :-(
So, i added fins to my snow version - to stop the spinout !!! Since this will probably be my sled of choice until ice melts from local rivers. And this may be sooner than later !!! Quick test with fins in the backyard and it did seem to stick better (less sliding) and cut through ice without bending.
May remove centre ski, butt leave it for now - one change at a time...


SUN 11MAR2012 - another warm day - guessing around plus 5 Celcius. Winds were light out of the West between 10 and 18 mph and we measured around 20 kph. Dom and his 9 year old son Vinnie came out to check the action. Used the ice sled with the MS-2 8-oh. Due to slushy conditions and light winds, no harness was required. Gloves stayed tucked into the jacket and water splashing up luckily did not soak me too much. Dom n Vinnie were soaked :-( Dom took some pics and videos that i will post. Too bad it was not a better day for that, but it is a first :-) At least even I will get to see my style or lack thereof :-)

Here's some pics and then I will try to inject a video:





As I wrote in the video descriptions: Ice sailboarding at Vaudreuils,Québec in spring conditions with WNW winds at about 10 knots, close to shore filming - even lighter winds - just wanna get a video out


THURS 15MAR2012 - last Sunday should have been the last day. Temps were in double digits Celsius since and some rain as well. I have already given up on the snow sailboarder. The only hope was the ice at Vaudreuils !! It was colder last night - around freezing and winds were ENE over 12 knots. However, since I grew up beside Lake Simcoe, I should have known to put the BIG boots on right away. Oh well, two wet feet later ... The ice was more of a slush with obvious soft spots BUT there were about six kiters zipping back n fro. So, rigged the MS-2 8-oh again with the ice sled. If it was real ice - it would be tooo fast. Fell at a good speed when i hit a soft spot hooked in and went head over heels. After that I learned to put more weight on the back foot and soft spots started to just be like a bump in Montreal roads - okay, NOT that bad :-) Practiced the tacks that seem to only go 3/4 and almost got a longboard gybe twice. Was warm , so, took off the harness and gloves. After about an hour was about to go when I thought Isaw Nat's SUV pull in. So, I gave her a quick demo and hit some larger soft spots that almost stopped - at least gradually. It was a pain getting on the ice and sank further each time back. As usual the sail is a pain down and up the stairs - which this time had to be at the private residence just north of the "car park". Definitely rate this session a resounding 9 outta 10 and was surely the last - sorry, to call you shirley...



Now it is time to put the ice and snow sailboards away and get the longboard and rest of it down :-)
As the wifey says - there is NO last time :-)
There is always another :-)
YAHOOOOOO

My buddy, Helmut is getting anxious to go to Cape Hatteras in mid-May.
It was my idea, but he has more money and more holidays - next year for me !!!!