Translator from GOOGLE

Mistral Equipe II / Mistral Equipe 2

In March of 2016 by chance I wandered through the back of the local windsurf shop called auventfou (means wild/crazy winds in English). The back of the store is where the used equipment is stored. Found two(2) Mistral Equipe II's that both needed a new gasket. Chatted with René about them and later sent an e-mail asking if they were replacing the gaskets - non. So, told them I was interested, but needed to find a way to properly fix the gasket. By chance buddy in Toronto, who I will call CAN322 in case he does not want to be identified was offering to sell gaskets. In the end he took one of the boards and I the other. He picked it up in MTL from Toronto on his way to Cape Hatteras in North Carolina...

I called them board #1 and board # 2 in the beginning ... Here are the initial photos:
taken at auventfou

and this is board #2

Told CAN322 that I seemed to prefer board #2 and he had no issues with that. Once I got the boards home, I took some pictures of board #1 for him ...

As you can see, the boards came with fin, centreboard and bag. The only issue on quick view is the gasket. Board #1 seems to be the CHS model which is more sturdy and seemed to be in good shape. Board #2 is the  XR model which is lighter and more fragile. There was a nose repair - that seemed well done and under the gasket the plastic cover broke up requiring epoxy repair before one could even think about putting a new gasket.

put the Nikon cap so camera could focus

Once the board seemed water proofed I took it for a spin, but winds were < 20 kph and race sail with cambers was giving me issues. The board was NO trouble @ all - I had duct taped the slot and put the centreboard in - in case I needed it - but did NOT... 

Before I stop for today , it is very important to have an idea of the specifications:

Length: 375 cm
Width:    66 cm
Volume: 258 liters CHS / 260 liters XR
Weight: 13.7 kg CHS and 12.6 kg for the XR
Fin: PowerBox 38 cm slalom fin G10 for CHS and carbon 4 XR
Centreboard: 69 cm at first measurement
OFO is actually 38 cm also !!

Asked on iwindsurf what people were using to glue the gasket on... 
Two people suggested epoxy, two suggested crazy glue and two suggested marine glue/polyurethane... CAN322 will get back to me with his results. Has been glued on and now just needs to slice it down the middle and test !!

Here WAS a video of James Douglass rockin on a MEQ II !!! GONE !!

Will put more photos and discussion as time goes on ...
and do a comparison of MEQ I and II - perhaps with a video ...
here is my discussion on the MEQ One ...

since March to April I managed to get the board out about three(3) times.  Now put gorilla water proof tape on top of centreboard slot for water not to come out. CAN322 is still doing experiments with glue and may be going towards crazy glue... So  far have not had the board out in 20 + kph winds... Am still loathe to sell my Mistral Equipe One ...

Update: The MEQ One has been sold and I will deliver it to Ontario for a small fee...
Had the MEQ Two out in some overpowering conditions @ OKA with the HSM SPF 8.5 and it was GREAT !!! Hope I look as good at it as James does in the video above !! My only concern is how well does the MEQ II do with a 7 m² sail ?? The MEQ I / one was great with this combo ...

Mistral Equipe II
The benchmark board, especially on the sea. It flies upwind on its sharp rails, has great reaching speed. Downwind there's enough volume to at least 'hang in there'. It was available with strong wind and lightwind daggerboards (though one was a bit small and the other a bit chunky). The slot flushers need replacing regularly (easily obtained, but hard work). Price range £250 - £500 second hand.

clique to enlarge
Found my June 1999 copy of WindSurfing Magazine where there is a small paragraph about the MEQ II and I quote:

The Equipe II is for the competitive full-length longboard racer who sails and races in solid breeze (12 mph or more) or who is slightly on the lighter side on the scale. The non-racer will still enjoy this board, but remember, it's the more fragile full-length board in Mistral's line. This is an excellent choice for anyone who enjoys high-performance longboard sailing, not necessarily racing (regardless of your weight). Its lightweight makes light-air days a pleasure for cruising, reaching and making long upwind treks.
This board used to be the board to beat in light air on the open class racing circuit. Its shape is slightly outdated now for light-air racing compared to some of the latest full-length boards available. 
Originally, it had the widest tail, a flat bottom shape and was very light to promote early planing and carry speed deep off the breeze. These attributes still make it a winner around the course, but lighter sailors (160 pounds and less) will be the most successful.
Heavier riders may look for a larger board, both in width and volume. The centreboard is a good shape, but feels small for heavyweights in light air when going upwind and trying to stay on the rail through the holes.

Some of that article felt right on and some surprised me. 
How much bigger of a board did a heavyweight need back then ?? 
There was the F2 Race 380 which was 290 liters and a Fanatic CAT 380 that was 280 liters... 

I have had a MEQ I/one and feel I would not want to go much floatier than this board. The Fanatic Ultra CAT/FUC actually felt more bouyant than the MEQ II/2, but my FUC  board was dying and was sold.

Ironically in the same edition of the WindSurfing Magazine, there was an article about early planing. They were comparing a full on race longboard, a transition longboard (like the MEQ I/one) and a wider shortboard. Believe the AHD 299 was about 80 cm wide, which was wide for then. They used a 10 m² sail for their tests and around 10 mph which is about 10 knots,  all boards did fairly well. ( I prefer an 8 square meter sail on my longboards in really light winds ...)  It is under 10 knots (or 20 kph for me) that a full on race board narrowly edges out a transition longboard. As I write elsewhere on this blog, in  today's world, it is like comparing a SB Phantom 377 with a SB Phantom 320 and a JP SLW92/SB US147. In my case this is comparing a MEQ II with a MEQ I and my JP SLW92. In 8-12 mph or knots, there are conditions where I might prefer one over the other. It also basically means with a longboard and a wide freeride , light winds are your friend !! 
Ironically they were "speaking" about the importance of width and reduced wetted surface in this article of many years ago ...

Don't have any better videos and so, am posting this one for now !!

Got a "better" video on Lac Deux Montagnes last Friday. Still need to move mast track back, harness lines too (even if I can ride hands free) and start to use footstraps and sliding track. Almost at that point where I have to fix the gasket !!

oka FRI June 10 2016 from joe windsurfer on Vimeo.

Later in the month I had an even better run with the setup. I had moved the mast track back to about 3/4 (don't do it on the fly YET) and cut the safety bungee rope that just kept getting in the way. In order to get to the straps I will have to move mast all the way back and lean sail back more. Am getting there slowly - still loving the board - was hitting 20 knot winds that day ...

I still have not attempted to attach the gasket to the bottom of the board and put gorilla tape on the top of the board and keep the centreboard down  just under the top of the board. On James Douglass' blog he suggests putting the gorilla tape AS the gasket !!

Okay.. I FINALLY purchased the proper gasket from
As you can see ... I did a messy job and also had the misfortune of denting the bottom when the cement blocks slid off the board. All this does NOT matter as it does NOT affect performance. For now I will put tape over the top and see how i like it with NO dagger at all  Too bad the 2016 season is over ... Went to local river to see about just trying it out today SUN 05NOV2016 and the water was low and the place is just a mess ... NO GO there any more $%^&*())

DID manage to test the above setup on SUN 13NOV, but at La Crête , OKA with some decent winds - this board with NO dagger and NorthSails Duke 6.9. It was a riot until I found the submerged rock. My fin came off with NO damage to the fin box. Busted at the bolt. Was doing full blast runs parallel to the beach since wind was on-shore. Tried to find the fin, but was NOT sure about using a repaired fin ... Instead in early 2017 purchased a Makani Kauila 32 cm fin at half price - clear-out from the manufacturer. The fin did NOT fit well and did NOT align with screw 😞 After about 2 hours futzing about, managed to make it look decent enough ... Supposed to be a slalom fin capable of screaming in BIG winds.Will see how it does in light and bigger winds ...

It is now 2017 and I am loving this board. Sometimes people ask me if I would be interested to sell it. For me , if the price is right and delivery\carry is NOT too complicated, why not ?? Always looking to try Kona ONE or SB Phantom or Exocet RSD2 or AHD SeaLion or FOIL for that matter. The problem is : one does NOT get a lot of money for these great , old boards and there are fewer and fewer on the used market. One just sold on e-Bay for 400 US$. Looked like the CHS model ...

My board is XR carbon version and ...
The board has NO soft spots and is air tight. The fin that was broken and lost was a Fanatic Hawk 34 freeride fin that I liked to use in shallow waters. The board did well with it and tried to replace it with a Makani, but had some issues ... NOT tried yet... Still have the original Mistral fin with the Mistral screw + handle & has some MarineTex repairs, but requires more

The dagger is in excellent shape and NOT used by yours truly. In same pic, there are some pocks from previous owner(s)

Have the Mistral mast base and extension, but board takes Chinook screw too

The mast track is already here in this post and works fine - 
I don't use it on the fly - usually having too much fun ...

Q) When does one know one has a board that should NEVER be sold ??
Have tried BIC Dufour (still have 2) , Fanatic Ultra CAT/FUC board, Mistral Equipe One XR, this Mistral Equipe 2 XR and a Kona One once. Not tried an RSD2 nor Phantom. So far this one is the BEST of what I have tried. Is it a keeper ??

It is now 2018 and so far it IS a keeper
Have an opportunity to purchase an RSD2 this year from Toronto
When I asked about the idea on iwindsurf the most sound advice was,"If you are an expert racer, you will love it, otherwise you will hate it." Was somewhat surprised at that answer, and yet it makes sense ...

Werner has gone from a Malibu to a MEQ2 as well !!

Found this video of a fellow flying on a MEQ2 with a SW Retro 10-oh in 15 knot winds.
No dagger and the mast is all the way back ...

On iwindsurf forum Dan Weiss wrote this:

The board is a generation 2 Equipe. The first Equipe was a lower volume race board one or two iterations from the latter Pan Am boards. The first Equipe had a winger pin tail and only a Euro-box. It also is revealed by looking at the mast track pedal. Red and round for the first gen Equipe, black and rectangular for the Gen 2. For reference, the Gen 2 Equipe is the exact same shape as the IMCO. 

The Gen 2 Equipe in XR build is one of the greatest race boards of all time. Mine weighed 22 lbs. and sported a choice of two centerboards, one "standard" size and the better one a light wind size that stood proud of the deck. Each were carbon. The fin box was a Power Box. This board is fast downwind though doesn't head as deep when compared to the modern longboards designed 25 years later. It sails easily into the upper 20 knot range, regardless of chop. It does not stuff the nose downwind and can be railed and driven hard upwind, going just as high and fast as many of the new boards when the wind is up.
In Oktober 2022 Francois Gauthier asked me to weigh the centre board and the board itself. The "keel" was 0.7 kilos and the board with the eight straps was 14.1. Earlier in this discussion the XR carbon model was listed as being 12.6 kilos - I assume that's without straps and epoxy !! :-)


  1. Cool, man. Good luck with that gasket. It will make a big difference when you have it sealed up nice.


    I did the same with my equipe and I used Sikaflex-11FC

    1. looked at some of your videos
      WOW Lefebvre sails
      drooling here

  3. James you're a lucky man! I need the 258/260 liter volume. I'm so big it's the only board I can sail so I'm in desperate need of a superlight 2 or Equipe 2. I'm offering a finders fee for any individual who leads me to the purchase of either board.

    1. Actually James commented on my blog - Joe's :-)
      you need to tell where u are and how much of a finder's fee :-)

    2. Jim, please contact me. I have a Superlight 2 in A condition, but I am in St. Paul, MN. Tom 651.33 748 23.

    3. I have a Superlight 2 in Minnesota

    4. My Superlight 2 is in A condition. My name is Tom. I can send pictures. I live in St. Paul.

  4. What did you use for the bottom gasket? Thanks

    1. actually I have NOT put a gasket YET. Still have the plastic that CAN322 gave me. I still put duct tape on the top of the board and leave dagger slightly protruding or leave dagger out and put just tape top n bottom. He has found this and I am ordering that:

  5. HI Joe.
    I also have the Mistra Equipe II, the CHS version. I have a qusteion for you. Dose you daggerboard have some sort of brake / bumper devise, preventing the daggerboard from pivoting to far forward and making a dent i the top / back of the daggerboard assy. BR and greatins from Henrik Jacobsen in Denmark

    1. Guten Tag Henrik\God Dag

      I checked your blog den166 and you seem to have MANY older raceboards. This is the FIRST time I have heard about the dagger going PAST the 90 degree mark. I am guessing you are missing something in the bottom of the dagger casing. Take a look at this pic from further up the post:
      Dagger should NOT be able to go past the front of the casing - either that or something is wrong with the "knobs" on the dagger - stopping it from sitting correctly.

      Lotsa luck on this and keep on racing !!!
      You sound as bad as me - except you keep the boards
      Alles Gute\Alle Gode

  6. I have a Mistral Equipe 2 xr have had it for decades since new an love it. But...wanna get a Starboard Phantom 2016 377 263L or 263 Carbon. When I Google that board it shows me u have one for sale but when click on link I can't find it. Do you have one for sale? Fyi I stopped using my center board over a decade ago an replaced seal with a one peace gasket that does not have cut for center board

    1. once i reported on a Phantom for sale and I asked opinions about getting one. people suggested i stick with the MEQ... Phantom too sensitive to injury :-(

    2. Please detail what he "MEQ" is. I've never seen a phantom in person but am concerned about damaging the bat wings. I do sail in areas that are Rocky so do kinda need a board that can take some xr has lasted all these years.

    3. sorry - MEQ = Mistral Equipe
      I give all my boards nicknames :-)


  7. Got a CHS after reading some good reviews here, so thanks for the inspiration. I've long admired the Equipes after having the chance to sail one when they came out, remember thinking it was skittish like a racehorse - but then I was used to an original Windsurfer :) However, I really liked the Mistral SST, very solid and fun and super happy with the CHS. Hope to get this out to the "big lake", i.e. Superior, but so far very happy with 1 of the 10,000 lakes (I'm in MN). Keep up the inspiring posts.

    1. GLAD you like it. It is still my MOST used board - in over 80% of my sessions as I cannot pic n choose when to go ie when there is wind ... ENJOY

  8. Does the equip 2 use the same dagger board as for the Mistral superlight 2?
    Meaning the dagger board from the Equip 2 can also be used in the superlight 2 or vice versa.

  9. Do you happen to have a extra mast foot like the one you have in the picture: ???


    1. i still have that mast foot somewhere and I do not use it !!


all comments are now moderated = sorry.
due to comment spam
MUST have google account ...